Activating users with identification media - LSM 3.6 Business + Prof.
Users can activate themselves using their identification medium and User PIN on their own.
The user selects their User PIN themselves. The User PIN must meet the following requirements:
- Length as specified in LSM (see Determining the PIN length)
- No trivial PIN (see Trivial PIN)
The example shows the activation for a User PIN with eight digits. If the length of the User PIN is not eight digits, then the length of the numerical code is different.
- User created and authorised (see Creating users).
- PIN code terminal programmed (see Programming the PIN code terminal).
- Locking device programmed (see Programme locking device).
- Master PIN changed (see Changing the master PIN).
- Activate the identification medium on the locking device.
- The locking device does not engage, but beeps and flashes for a short time. This is normal in this case.
- Press
0for more than two seconds to activate programming mode. - PIN code terminal beeps and flashes orange once.
- Enter
02. - Enter the User PIN.
- Re-enter the User PIN.
- PIN code terminal beeps and flashes green twice.
- PIN code terminal performs an opening on the locking device.
- If the user has not yet been activated: Data record is saved (beeps and flashes green-orange).
- If the user has already been activated: Terminal rejects (beeps and flashes green-orange followed by long red).