Language
deutsch
english
français
nederlands
italiano
dansk
svensk
Home
General information
General safety instructions
Product-specific safety instructions
Legal notes
System requirements
Release Notes
LSM 3.5 Release Notes
Release Notes LSM 3.5 SP1
Release Notes LSM 3.5 SP2
Release Notes LSM 3.5 SP3
LSM 3.6 Release Notes
Information on the manual
Data protection in System 3060
IT basic protection
What protection requirements do the data processed in the system have?
What IT infrastructure requirements are recommended?
System-wide measures and methods in detail
Is the data in System 3060 encrypted?
Do the encrypted packages contain personal data?
Are the transmission channels also encrypted?
How secure is end-to-end encryption?
Can key copies of identification media be created unnoticed?
Can an opening signal be intercepted and repeated (replay attack)?
Communication via cloud services (e.g. AX2Go)
Will my data be stored in the cloud?
Is the pseudonymised data protected from third-party access during transmission?
How is authentication handled with SimonsVoss Cloud Services?
Where is the pseudonymised data stored on the smartphone?
Intended use
Meaning of the text formatting
Installation
Software
LSM Business/Professional
Install and configure ADS server
Create folder structure
Install ADS server
Configure ADS server
Check ADS server service
Share database on the network
Install and configure LSM Business
Install LSM Business
Configure LSM Business
Install Crystal Reports hotfix
VN host
CommNode
Creating communication nodes
First steps after a new installation
Recommended approach to handling passwords
Register LSM
Add locking system
Overview of protocol generations
G1 locking system
G2 locking system
Mixed G2 + G1 system
Overlay mode
Backing up the database automatically
Programming devices
Identify programming devices and use properly
SmartCD.G2
SmartCD.MP
SmartCD.HF
SmartStick AX
Programming distance
Programme hybrid locking devices
Check connection
User interface
Menu bar
File
Print Matrix
Page view
Printer set-up
Change user password
Finish
Database
Log on
Log off
Setup
Backup
View
Status bar
Edit
Areas/transponder groups
Doors/Persons
All secondary areas/Open groups
Log
Matrix settings
Additional columns
Refresh
Filter
Installation wizards
Wizards/Door
Wizard/Person
Edit
Properties: Locking system
Name
Locking devices
Doors
Transponders
Transponder groups
Areas
Password
Special TIDs
PIN code terminal
G1 card management
G2 card management
Properties: Locking device
Name
Door
Transponders
Actions
Features
Configuration/Data
Configuration/Data: DoorMonitoring SmartHandle
Configuration/Data: DoorMonitoring locking cylinder
SmartRelay (G1): SREL, SREL.ADV, SREL.W
SmartRelay (G2): SREL.G2, SREL.W.G2, SREL2.G2
SmartRelay 3
Status
Access list
DoorMonitoring status
Properties: Transponders
Name
Holder
Doors
Actions
Configuration
Features
Physical access list
Edit/New locking system
New locking device
New transponder
Transponder group
Person
Area
Door
Building
Location
Public holiday list
Public holiday
Time zone plan
Time group
Local time zone
User
User group
Roles & rights
Reports
Locking system
Area
Transponder group
Door
Locking device
Transponder
Time group
Time zone plan
Network
Personnel structure
Building structure
User
Miscellaneous
List of present persons
Define entrances and exits for areas
Print locking device labels
Print transponder labels
Manage warnings
Warning monitor
Programming
Transponder
Locking device
Read highlighted locking device/Set clock
Read locking device
Read MIFARE locking device
Read transponder
Read G1 card
Read G2 card
Special functions
Special functions/Read Compact Reader
Special functions/Activation transponder
Special functions/G2 activation card
Special functions/G2 battery replacement transponder
Special functions/G2 battery replacement card
Implement emergency opening
Test SmartCD active
Test SmartCD Mifare
LSM Mobile
LSM Mobile/Export to LSM Mobile
LSM Mobile/Import from LSM Mobile
LSM Mobile/Exported tasks
Virtual network
Virtual network/Export to VN network
Virtual network/Import – synchronisation
Virtual network/Reset VN task
Virtual network/Exported VN tasks
Options
Working in compliance with data protection regulations GDPR
Print Matrix
Logging
Automatic numbering
Advanced
Check need for optimisation
Optimise authorisations
Optimise table structure
Asynchronous loading
Miscellaneous
System 3060 locking plan file
Employee data from LDAP
Employee data from CSV file
Door data from CSV file
Locking plan from CSV file
Export matrix
Divide locking system
Select exceptions in time zone management
Time-controlled authorisations
Employee photos
Reports
Access lists
Security user password
Network
Locking device activation
Collective tasks
Event manager
Task manager
Setting up Task services
Creating a task
Possible tasks
Email messages
VN service
Communication node
Local connections
Manage WaveNet
WaveNet Manager
Import WaveNet topology
Manage LON network
Terminal Server client settings
Windows
Help
Help topics
SimonsVoss online support
SimonsVoss online
Info about LockSysMgr...
Registration
Disable and clear registered clients
Information on licence use
Versions overview
FAQs
Check for updates
Database report
Menu ribbon
Locking system
Groups and areas
Matrix
Background knowledge on LSM
Group authorisations
Group reserves (G1 only)
Inheritance
Authorisations in the G2 protocol
Time zone plans
Time groups and schedules
Time switchovers
Examples
Common locking level
Detail function for the overarching locking levels
Encryption (WaveNet)
Basic functions
Add new locking system
Add new transponder group
Add new transponder
Create FORTLOX key
Assign transponder to a transponder group at later point in time
Add new area
Add new locking device
Create FORTLOX cylinder
Create SmartRelay AX
PinCode keypads
PinCode AX
Create PinCode AX
Change length of PINs in PinCode AX
Creating PINs for PinCode AX
Programme PinCode AX
Assign PinCode AX to a different locking device
Read out the PinCode AX
PinCode Keypad (G1)
Configure PIN code Keypad
Add PIN code Keypad to the locking plan
Programme PIN code Keypad
PinCode terminal
Setup:
Prerequisites
Trivial PIN
Changing the master PIN
Determining the PIN length
Set mode
Preparing locking devices in LSM
Programming the PIN code terminal
Programme locking device
Management
Knowledge = PIN (knowledge)
Creating users
Unlock user with initial PIN
Changing the user PIN
Change forgotten user PIN with replacement PIN
Delete user
Verification (flexible PIN) = Transponder + PIN (possession and knowledge)
Creating users
Activating users with identification media
Changing the user PIN
Change forgotten user PIN
Delete user
Verification with fixed PIN = Transponder + PIN 2 (possession and knowledge - unchangeable PIN)
Creating users
Issue user PIN
Changing the user PIN
Delete user
Reading out the PIN code terminal
Reset
Resetting with LSM
Hardware reset
Assign locking device to an area
Issue/withdraw authorisation
Setting up DoorMonitoring components
Common locking level
Add common locking level
Link locking devices
Link transponders
Authorise transponders
Create fire service transponders
Backing up the database manually
Working in compliance with data protection regulations GDPR
Export data
Deleting Data
What personal data is stored in the software?
For what purpose is personal data stored in the software?
How long is personal data stored in the software?
Is personal data in the software protected against access by third parties?
Can the stored data be made available as a copy?
Can personal data be deleted from the software?
Search matrix
Execute group actions
Programme transponder
FORTLOX key programming
Programme locking device
FORTLOX cylinder programming
SmartRelay AX programming
Programme using LSM Mobile
With laptop, netbook or tablet PC
Define time zone plan (with public holidays and company holidays
Resetting components
Replace defective locking device
Block transponders
Block transponder permanently and create replacement transponder
Block transponder temporarily
Check and evaluate the battery level in the locking devices
Reset storage mode in G1 locking devices
Reset freeze mode in G2 locking devices
Access administration
Access lists
Read access list (Cylinder AX)
Read access list (SmartRelay 3 Advanced)
Administer users
Card management
Change configuration
Overview
Forwarding USB programming devices to terminal servers (LSM Professional)
SmartCD.G2 / SmartCD2.G2
CommNodeAgent
USB / Ethernet Server
SmartCD MP / HF
Remote desktop connection (up to LSM 3.5 SP1)
Remote desktop connection (from LSM 3.5 SP2)
USB / Ethernet Server
SmartStick AX
Remote desktop connection (from LSM 3.5 SP2)
USB / Ethernet Server
Setting up time switch-over
Resource management
Scheduling authorisation
Scheduling individual authorisations (matrix)
Scheduling multiple authorisations (resource management)
Ignore time groups for authorisations
Ignore time group for individual authorisations (matrix)
Ignore time groups for multiple authorisations (resource management)
Best practice: Enter cylinder lengths
Performing standard WaveNet-based tasks in LSM
Creating a WaveNet radio network and incorporating a locking device
Preparing the LSM software
Initial programming of the locking components
Add new locking device
Create FORTLOX cylinder
Create SmartRelay AX
Programme locking device
FORTLOX cylinder programming
SmartRelay AX programming
Preparing hardware
Creating communication nodes
Setting up the network and importing into LSM
Adding the WaveNet configuration
Transmitting the WaveNet configuration
Assigning a locking device's LockNode
Testing the WaveNet configuration
Putting DoorMonitoring locks into operation
Possible (door) states
Possible DoorMonitoring states of SmartHandles
Possible DoorMonitoring states of locking cylinders
Possible DoorMonitoring states of SmartRelais 3
Possible states RouterNode 2 / GatewayNode 2
Incorporating a DoorMonitoring lock into the network
DoorMonitoring SmartHandle
Sabotage detection
DoorMonitoring (SmartHandle) - Door handle events
DoorMonitoring cylinder
Evaluating controller inputs
Transmitting the WaveNet configuration
Assigning a locking device's LockNode
Activating the locking device's input events
Setting up a RingCast
Preparing RouterNode for RingCast
Adding a RingCast
RingCast function test
Setting up event management
Setting up Task services
Forwarding input events via the RouterNode2
Forward input events via the SREL3 ADV system
Evaluating controller inputs
Creating a response
Possible responses
Information on the “Network message” response
Creating an event
Possible door events
Door monitoring event type
Default Events
Setting up an email server
Managing the virtual network (VN)
Virtual network with SmartRelay 3 Advanced
Functional principle
Setting up a locking system
Setting up the gateway and VN host server
Check virtual network status
Virtual network with SmartRelay 2 G2
Functional principle
Setting up a locking system
Setting up a VN service
Creating components and setting up LSM
Exporting authorisation changes
Status of the tasks in the virtual network (SREL2.G2)
Resetting tasks in the virtual network
Importing authorisation changes
Tips on VN
Read locking device
Glossary & abbreviations
Help and other information
Home
User interface
Menu bar
Network
Email messages
Email messages - LSM 3.6 Business + Prof.
Available in LSM Business with enabled online module only.