Access administration - LSM 3.5 SP3 Business + Prof.

The reading of access and physical access lists can be greatly restricted to protect privacy. In LSM Basic, the "AdminAL" (Admin Access List) user is added as standard for this purpose. In LSM BUSINESS, you can add a suitable user manually; see Administer users.

The following scenario is described in this section: Only an authorised person (e.g. Works Council logged on as the AdminAL) should be able to read access lists and physical access lists. The general locking system administrator is not given this right.

 

Configure AdminAL and permit reading of access lists

  1. Use the "Admin" user name and your password to log on to your project.
  2. Select "Edit/User group" to open user group administration.
  3. Use the navigation arrow to scroll to the "Access lists administration" user group (or to any previously added user group in LSM Business).
  4. Ensure that the "Access lists administration" and "Manage access lists" rights are activated in the "Role" section.
  5. Click on the "Edit" field beneath "Role" section.
  6. Activate the required locking systems in transponder groups and areas. If you have added areas or transponder groups, you must activate all required areas and transponder groups separately.
  7. Click on the "OK" button to close the mask.
  8. Confirm the settings that you made by pressing on the "Apply" and "Finish" buttons.
  9. Select "Database/Log off" to log off from your current project.

 

Remove rights to read access lists from Admin

NOTE

notice

The "Access lists administration" right must always be assigned to a user/user group and must not be withdrawn from both.

  1. Use the "AdminAl" user name to log on to the project.
  2. The default password in LSM BASIC is "system3060".
  3. Change this password immediately.
  4. Select "Edit/User group" to open user group administration.
  5. Use the navigation arrow to scroll to the "Admin" user group.
  6. Deactivate the "Access lists administration" and "Administer access lists" roles.
  7. Confirm the settings that you made by pressing on the "Apply" and "Finish" buttons.
  8. Configuration is now complete. Only the "AdminAL" user account may read or view access lists and physical access lists from now on.