FORTLOX key programming - LSM 3.6 Business + Prof.

  1. FORTLOX Key created (see Create FORTLOX key).
  2. FORTLOX Key is not plugged in the FORTLOX Cylinder.
  1. Select the FORTLOX Key you wish to programme.
  3. Click the button to open the programming window.
  4. The Transponder Programming window will open.
  6. Click on the Programming button.
  7. Programming starts.
  8. Follow the instructions and press the FORTLOX Key button for two seconds.
  10. Pressing the button for at least two seconds wakes up the device’s BLE interface of the FORTLOX Key and enables communication.

  12. NOTE

    notice

    Time window after waking the BLE interface

    The BLE interface of the FORTLOX Key is activated when the button is pressed for at least two seconds. To conserve the battery of the FORTLOX Key, the BLE interface will be deactivated after approximately 30 seconds.

    1. In this case, press the FORTLOX Key button again.
  1. The FORTLOX Key is programmed.

The need for programming in the matrix is eliminated.