Setting the PIN length (PinCode AX) - AXM Classic

NOTE

notice

Description only valid for PIN code keypad AX

The setting described here is only available for the PIN code keypad AX in yourAXM Classic. On the PIN code keypad 3068, you can use the Master PIN to change this setting directly on the PIN code keypad 3068.

You always set the PIN length for the entire PIN code keypad AX, i.e. for all PINs simultaneously. For this reason, you must then reassign each PIN and synchronise the PIN code keypad AX.

  1. AXM Classic open.
  2. Matrix screen open.
  3. PIN code keypad AX created (see Creating PIN code keypads).
  1. Click on any PIN to open details on your PIN code keypad AX.
  2. The PinCode - Details window will open.
  4. Select the required PIN length from the Pin length drop-down menu.
  6. Your AXM Classic will alert you to the upcoming workload.
  8. Click on the OK button.
  9. All PINs are red and must be reassigned.
  10. Reassigning the PINs.
  12. Click the Finish button.
  13. PinCode - Details window closes.
  1. The PIN length and PINs have been changed and the resulting programming requirement is displayed in the matrix.