Programming with the local programming device - Step-by-Step WO

NOTE

notice

Initial programming via WaveNet

The SI.SmartCD cannot carry out initial programming.

  1. Programme your new locking devices via WaveNet (see Programme locking device).
  1. SmartIntego-Tool (WO) opened.
  1. In the navigation area, click the entry for the locking device.
  2. Locking device properties open.
  3. Select the option SI.SmartCD.
  5. Position the programming device on the locking device (example: locking cylinder).
  7. Click on the Program button.
  8. Locking device is programmed.
  9. Hold the programming wand in place until programming is complete.
  1. Locking device is programmed.