Set to storage mode - Step-by-Step WO

NOTE

notice

If the SmartIntego PIN code keypad is to be used in a different system, the SmartIntego PIN code keypad not only needs to be deleted in the configuration view, but also set to storage mode.

The SmartIntego PIN code keypad can be reset to storage mode. This process also deletes all network settings.

Type in the numbers for the individual steps consecutively and carry out the steps one after the other without pausing.

  1. Press and hold 0 for about two seconds.
  2. Enter 0000.
  3. Enter the Master PIN.
  1. SmartIntego PIN code keypad beeps and flashes green briefly twice.
  2. Storage mode set.

NOTE

notice

If the SmartIntego PIN code keypad is already in storage mode, it cannot be set to storage mode again. In such a case, the process will be interrupted with a red flashing light and beeping for a long time.