Disengage locking device in the event of a network failure - Step-by-Step WO

If the network fails or the integrator system cannot be reached, the locking device uses the integrator whitelist (see TCP: Prepared installation (Integrator Whitelist)).

The cards of the integrator whitelist can be stored individually on the locking device.

If the locking device is currently engaged, it can be disengaged with a card stored on the whitelist.

  1. Hold the card in front of the lock.
  2. Locking device reads card (blue LED).
  3. Locking device attempts to reach integrator system. If there is no response after a predefined time, the whitelist is used.
  4. Locking device engages if the card is included in the whitelist.
  5. Locking device reads card again after two seconds (blue LED).
  1. Locking device disengages.

NOTE

notice

The construction site whitelist not suitable for disengaging in the event of a network failure

The construction site whitelist is designed to allow access to the rooms during the construction phase. Cards which are only included in the construction site whitelist cannot disengage the locking devices in the event of a network failure.

  1. Use the integrator whitelist (see TCP: Prepared installation (Integrator Whitelist)).