TCP: Add individual GatewayNodes - Step-by-Step WO

  1. GatewayNode powered and connected.
  2. TCP configuration completed (see Configuring GatewayNodes (TCP)).
  3. SmartIntego Manager opened.
  1. Right-click on the navigation root (WaveNet_XX_X).
  2. The window Administration opens.
  4. Select the option Add IP or USB gateway.
  5. Click on the button OK.
  6. Window Administration closes.
  7. The window Add IP or USB Gateway opens.
  9. Enter the IP address (example: 192.168.100.100, End IP: 0).
  10. Click on the button OK.
  11. Window Add IP or USB Gateway closes.
  12. Right-click the entry of the new GatewayNode.

  13. NOTE

    notice

    Name assignment by name list

    If you are using a name list (Creating, expanding and importing a name list see), you no longer need to name the GatewayNodes.

  14. The window Administration opens.
  15. Specify the name of your GatewayNode.
  16. Click on the button OK.
  17. Window Administration closes.
  18. Click on the button Save.
  19. SmartIntego Manager contacts the GatewayNode.
  20. SmartIntego Manager assigns GatewayNode device address.
  21. SmartIntego Manager saves routing table in the GatewayNode.

NOTE

notice

Data loss due to improper termination

The data is not transferred to the SmartIntego tool (WO) until the SmartIntego Manager is properly ended. After saving, the files are permanently saved in the * ikp file in the SmartIntego tool (WO).

  1. Click on the Save button.
  2. Close SmartIntego Manager correctly using the button Exit.