Measure doors - Step-by-Step WO

  1. Measure each door in the project individually (values to be measured depend on the locking device type, see table).
  2. Enter the results of the measurement directly in the SmartIntego-OrderTool.

Measure the following values:

Locking cylinder

SmartHandle

  • Profile (European profile, Swiss round profile, ...)
  • SmartIntego technology (WirelessOnline)
  • Desired locking cylinder properties (see price list)
    • CO (Comfort = One side permanently engaged mechanically)
    • FD (freely rotating = knob with reader on both sides)
    • AP2 (anti-panic version)
    • HZ (Half cylinder)
    • ...
  • External dimensions
  • Inside dimension
  • Profile (European profile, Swiss round profile, mechanical...)
  • Desired mechanical overrideability (MO)
  • SmartIntego technology (WirelessOnline)
  • Desired properties of the SmartHandles (see price list)
    • SI-S2 (SmartHandle AX)
    • ...
    • SH (SmartHandle 3062)
    • ER (Escape and Return = time-controlled return function)
    • WP (Weatherproof)
    • DM (internal sensors)
    • DM (external sensors)
  • Door thickness
  • Asymmetrical installation of the mortise lock (see SH manual)
  • Spindle
  • (Note the asymmetrical installation of the square on the SI:SmartHandle).
  • Fastening
  • Centres distance
  • Version
  • Handle design outside
  • Handle design inside
  • Surface (colour, finish)
  • Options
  • Cover (narrow or wide)