Hardware reset of external LockNodes - WaveNet

You can reset WaveNet Manager-enabled LockNodes (recognisable by WNM in the article number):

  1. Disconnect the LockNode from the power supply or remove the batteries.
  2. Wait for about 20 seconds.
  3. Press and hold the Init button.
  4. Reconnect the power supply or replace the batteries.
  5. LED lights up constantly red.
  6. Release the Init button while the LED is constantly red.
  1. All WaveNet information in the LockNode is deleted.

You can re-integrate the LockNode into your WaveNet (see WaveNet manual).

The SmartIntego variant (SI.N.IO) can only be reset in the SmartIntego Manager.