Connecting RouterNode - WaveNet

You have two options for connecting your Ethernet RouterNode to your computer:

Option 1: Direct connection with CAT.5 patch cable

  1. Computer not connected to a network.
  2. Computer with assigned static IP address.
  1. Connect the Ethernet port on the RouterNode to the computer's Ethernet port.

You can set the IP address for the later location (see Determining and setting the IP address) or operate the RouterNode permanently directly on the Ethernet port of your computer.

Option 2: Connect to the local network

  1. RouterNode and computer in the same network (subnet).
  2. DHCP server available.
  1. Connect the Ethernet port of the RouterNode to a free network port on the network.
  2. Connect the Ethernet port of your computer to an available network port on the network.

You can set the IP address for the later location (see Determining and Setting the IP Address (Determining and setting the IP address) or operate the RouterNode permanently on the same network as your computer.