General safety instructions - WaveNet

Signal word: Possible immediate effects of non-compliance

WARNING: Death or serious injury (possible, but unlikely)

IMPORTANT: Property damage or malfunction

NOTE: Low or none

WARNING

warning

Blocked access

Access through a door may stay blocked due to incorrectly fitted and/or incorrectly programmed components. SimonsVoss Technologies GmbH is not liable for the consequences of blocked access such as access to injured or endangered persons, material damage or other damage!

Blocked access through manipulation of the product

If you change the product on your own, malfunctions can occur and access through a door can be blocked.

  1. Modify the product only when needed and only in the manner described in the documentation.

IMPORTANT

Operational malfunction due to radio interference

This product may be affected by electromagnetic or magnetic interference.

  1. Do not mount or place the product directly next to devices that could cause electromagnetic or magnetic interference (switching power supplies!).

Communication interference due to metallic surfaces

This product communicates wirelessly. Metallic surfaces can greatly reduce the range of the product.

  1. Do not mount or place the product on or near metallic surfaces.

NOTE

notice

Intended use

SimonsVoss-products are designed exclusively for opening and closing doors and similar objects.

  1. Do not use SimonsVoss products for any other purposes.

Different times for G2 locks

The internal time unit of the G2 locks has a technical tolerance of up to ± 15 minutes per year.

  1. Regularly reprogram time-critical locking devices.

Qualifications required

Installation and initial operation require specialist knowledge.

  1. Only trained specialist personnel may install and put the product into operation.

Modifications or further technical developments cannot be excluded and may be implemented without notice.

The German language version is the original instruction manual. Other languages (drafting in the contract language) are translations of the original instructions.

Read and follow all installation, installation, and commissioning instructions. Pass these instructions and any maintenance instructions to the user.