Output (light with increased current requirement) - WaveNet

In this context, lights with increased power requirements are light sources which are operated with more than 3.3 VDC and/or 200 mA. Do not connect these lamps to the power connection next to the IO connector, but use a suitable power supply unit.

IMPORTANT

Load capacity of the relay

The relay in RouterNode 2 may be loaded with maximum 650 mA continuous current and 12 VDC switching voltage (see also technical data in RouterNode 2 manual).

  1. Do not use the relay to operate devices that exceed these specifications.
  1. Connect the ground connections of the power supply unit and the signal lamp.
  2. Connect the positive terminal of the power supply unit to O1.COM.
  3. Connect the positive pole of the signal lamp to O1.NO.