Output (LED) - WaveNet

Connect the LED to O2 or O3 to indicate the second or third output.

  1. Connect the cathode of the LED (-) via the series resistor X to O3 or O2.
  2. Connect the anode (+) to the positive pole of the power connector next to the IO connector.

The value of the resistor X depends on the LED used.

IMPORTANT

Current carrying capacity

The power connection next to the IO connector supplies between 3.0 VDC and 3.3 VDC and may be loaded with a maximum of 200 mA.

  1. Do not use the connector to operate equipment that exceeds these specifications.