Device function test - WaveNet

Check the functionality of your WaveNet devices once a month. Please also refer to the documentation of the devices.

WARNING

warning

Change in the sequence of emergency functions due to malfunctions

SimonsVoss and "Made in Germany" stand for maximum safety and reliability. In individual cases, however, malfunctions of your devices cannot be ruled out. This may pose a risk to the safety of persons and property, which are additionally protected by the protective functions in the RingCast.

  1. You should test your devices at least once a month (see Device function test Shorter intervals may also be required according to other regulations concerning your overall system).
  2. Test the protective functions at least once a month (see RingCast function test).

Locking devices and identification media

  1. Activate the locking device.
  2. Locking device is free-running.
  3. Activate an authorised identification medium.
  4. The locking device indicates authorised access (or battery warning, then replace batteries).
  5. Locking device opens when the battery condition is good.
  6. Wait until the locking device disengages.
  7. Locking device indicates disengagement (or nothing if battery is low).
  8. Activate an unauthorised identification medium.
  9. Lockdevice indicates no authorisation (or battery warning, then change batteries).
  10. Check the battery level (see Battery management).

WaveNet devices

  1. Check the signal quality (see Check signal quality).
  2. Check accessibility (see Test reachability (LSM) and Testing accessibility (WaveNet)).
  3. Check the battery level (see Battery management).