Creating an identification medium - AXM Plus

Your users can use identification media to engage and disengage locking devices (also see Identification media, locking devices and the locking plan).

Your AXM Plus will provide you with the following identification media to choose from:

  • Transponder
  • Cards
  • PIN code keypad AX
  • PIN code keypad 3068 with G1 protocol
  • AX2Go key

These identification media differ from one another:

 

Cards/transponders

PIN code keypad AX

PIN code keypad 3068 with G1 protocol

AX2Go key

Operable locking devices

All locking devices that have the required interface (active/passive).

Only the locking device assigned in AXM Plus.

All locking devices that feature the required interface and firmware (BLE 1.1.1148 and higher).

Available settings

All

  • Time groups
  • Activation and expiry date
  • Long opening
  • Acoustic opening signal
  • from now
  • without expiry date

Service Sets

For transponders

No

No

Creation procedure

See Creating transponders and cards.

See Creating PIN code keypads.

See Assigning keys for AXM Plus and higher.

Further information on the different identification media and their differences can be found in Section Identification media, locking devices and the locking plan.