Step 2: Mount adapter plates to outer fitting - SmartHandle 3062

  1. Insert the sleeves (X1) into the adapter plate for the outer fitting (C) so that the springs of the sleeves engage in the mortises of the counterbore holes.
  2. The sleeves are flush in the adapter plate and are secured against turning
  3. Place the spacer plate (D) flush with the adapter plate so that the heads of the sleeves are concealed.
  4. The six remaining drill holes are flush.
  5. Install the outer fitting (4) flush onto the spacer plate.
  6. The six threaded holes of the outer fitting are flush with the drillholes of the adapter plate and spacer plate.
  7. Fasten adapter plate, spacer plate and outer fitting with the six shorter screws.
  8. The sandwich-like construction is now massively connected.

The following illustration depicts all work steps pf this chapter: