Step 7: Mounting the inside handle - SmartHandle 3062

Attach the inside handle

  1. Make sure that the slide of the cover is in the position shown.
  3. Push the cover (shield) together with the cover onto the fitting.
  5. Press the inside of the cover firmly.
  7. Press the cover on the outside firmly.
  9. Attach the handle.
  11. Inside handle is attached.

Secure the inside handle

  1. Screw in the set screw of the inside handle.
  3. The inside handle is secured.
  4. If you have a Swiss Round version, clip the plastic cover onto the MO cut-out.
  1. SmartHandle is mounted.