Time switch-over function - SmartHandle 3062

This function is only available in the ZK version.

When the time switch-over is activated, a time zone plan needs to be uploaded beforehand. This allows the SmartHandle to remain unlocked during the indicated times (in Time Zone Group 5 - Locking). During the day, users can open the door when required while only a transponder or SmartCard will open it at night.

NOTE

The lock does not automatically lock after the handle has disengaged. You need to fit a self-locking panic lock to provide this function.

If you select time changeover, click on 'Advanced configuration'. The following options are available to you in the 'Time-controlled switch-over' box:

Manual disengage

SmartHandle does not disengage after the pre-set time interval until an authorised transponder or SmartCard makes a booking after this point in time.

Automatic disengage (normal setting)

SmartHandle disengages automatically after the point in time specified in the time zone plan.

Manual engage (normal setting)

SmartHandle does not disengage automatically after the pre-set time interval until an authorised transponder or SmartCard makes a booking after this point in time.

Automatic engage

SmartHandle engages automatically after the point in time specified in the time zone plan (important: people who are not authorised to enter may possibly gain access to the building or room concerned in such a case. Security should therefore be provided at the entrance - by the presence of a receptionist, for example).

The following options are available to you in the 'Transponder active' box:

Always

Transponders and SmartCards are not normally operative during the release period. However, if you wish a door not to be freely used when necessary (when everybody has left the building, for example), select this option. This allows the time switch-over to be interrupted and activated again manually.

Only if disengaged

In this operating mode, the transponder or SmartCard is not active during the release interval, i.e. the smart handle is engaged, transponders and SmartCards are not operative.