G2 battery replacement ID medium - SmartHandle 3062

A G2 battery replacement ID medium (transponder or smart card) is needed to eliminate freeze mode in a G2 locking device. This mode should never occur due to the integrated battery warning system; batteries are supposed to be replaced in good time. A dedicated G2 ID medium is required to produce the medium; you also require a programming device (e.g. SMARTCD.G2 for transponders) and LSM 3.0 or higher. You must be able to access the corresponding locking plan. Proceed as follows:

• Open LSM and enter the database
• Select locking system (if several are available)
• Go to 'Programming --> Special functions --> G2 battery replacement transponder', for example
• Select its locking system (if several are to be created)
• Click on 'OK'
• Programme ID medium using the programming device.

A separate ID medium which contains no other locking systems must be used as the G2 battery replacement ID medium. It is not used to open doors but to eliminate freeze mode in a G2 locking device only. If freeze mode is deactivated for a brief interval, the locking device can be temporarily opened as normal using an authorised ID medium. After using this ID medium, you must change the batteries in the SmartHandle; if you do not, the batteries may discharge completely.