LED reader - SmartRelay 3 system

Housing

Material

PA6 plastic (50% glass fiber reinforced, UV stable)

Colour

• Dark gray, similar to RAL 7021 or
• White, similar to RAL 9016

Standard protection rating

IP20

IP65 with WP variant

Anti-vandalism frame available

Wiring to device

Flush mounting

Power supply

Screw terminals

• V_IN: 9 V_DC – 32 V_DC (Power supply must be limited to 15 W)
• Power input: max. 3 W
• Reverse voltage protection: yes

The max. current depends on the supply voltage and the activity of the reader.

Controller powered

Supply via looped-through controller supply voltage

The max. current depends on the supply voltage and the activity of the reader.

Ambient conditions

Temperature range

• -25 °C to +60 °C (operation)
• 0 °C to +30 °C (in storage > 1 week)

Humidity

Max. 90%, non-condensing

Interfaces

RS485

Serves as an interface to the controller of the SREL3-ADV system.

• Number of ports: 1
• Length: ≤ 150 m, abs. max. 300 m (depending on firmware and cable)

RFID

• 13.56 MHz
• Read range: 0 mm to 15 mm (depending on card format)
• Supported cards: Mifare Classic, Mifare DESFire EV1/EV2)

B-field

Interface to SimonsVoss transponders.

• Read range (approx.): 5 cm to 60 cm (Close-up range mode, Gateway)
• Read range (approx.): 5 cm to 100 cm (Close-up range mode, Gateway)

Signal

Visually

3 LEDs (red, green, yellow)

Audio signal

1 piezo buzzer

Programming

Interfaces

The reader is programmed exclusively via controller. Interfaces of the controller:

• USB
• TCP/IP

For details, see controller.