SmartOutput module - SmartRelay 3 system

Housing

Material

  • Housing: Polycarbonate plastic, fibre-reinforced
  • Cover: Polycarbonate plastic

Colour

  • Housing: green similar to RAL 6021 (pale green)
  • Cover: transparent

Standard protection rating

IP20

Weight

~ 170 g (without packaging)

Installation

DIN rail (37 mm × 15 mm)

Power supply

Screw terminals

  • VIN: 12 VDC (11 VDC–15 VDC)
  • Standby current: < 120 mA
  • Max. current: < 150 mA
  • Reverse voltage protection: yes

Ambient conditions

Temperature range

  • 0 °C to +60 °C (operation)
  • 0 °C to +70 °C (in storage > 1 week)

Humidity

Max. 90%, non-condensing

Interfaces

RS485

Acts as an interface to the SREL3 ADV system controller.

  • Number of ports: 1
  • Length: ≤ 150 m, max. distance 300 m (depending on firmware and cabling)

Signal

LED

1 RGB

8 green

Relay

Quantity

8x, programmable separately from one another

Switching modes

Monoflop

Switching interval

Programmable between 1 s and 25 s (except 0 s, as on controller).

Contact type

1x NO

Contact material

AgNi+Au

Service life (electrics)

12 VDC / 10 mA: typ. 5 × 107 switching cycles

Service life (mechanical)

Typically 100 × 106 switching cycles

Bounce time

Typically 1 ms, max. 3 ms

Vibrations

15 G for 11 ms, 6 shocks as per IEC 68-2-27; not tested for permanent operation under vibration

AUX relay switching voltage

Max. 24 V

AUX relay switching current

  • Max. 1 A permanent current
  • Max. 2 A switching current

Switching voltage in outputs

Max. 24 V

Switching current in outputs

Max. 200 mA

OUT switching current

Max. 1 A

OUTPUT switching voltage

Max. 24 V

OUTPUT switching power

Max. 1 VA

OUT switching behaviour for low voltage

UV < 10.5 ± 0.5 V corresponds to off