General safety instructions - SmartRelay 3 system

Signal word: Possible immediate effects of non-compliance

DANGER: Death or serious injury (likely)

WARNING: Death or serious injury (possible, but unlikely)

CAUTION: Minor injury

IMPORTANT: Property damage or malfunction

NOTE: Low or none

WARNING

warning

Blocked access

Access through a door may stay blocked due to incorrectly fitted and/or incorrectly programmed components. SimonsVoss Technologies GmbH is not liable for the consequences of blocked access such as access to injured or endangered persons, material damage or other damage!

Blocked access through manipulation of the product

If you change the product on your own, malfunctions can occur and access through a door can be blocked.

  1. Modify the product only when needed and only in the manner described in the documentation.

Do not swallow battery. Danger of burns from hazardous substances

This product contains lithium button cell batteries. Swallowing the button cell battery, in can result in severe internal burns leading to death in as little as two hours.

  1. Keep new and used batteries away from children.
  2. If the battery compartment does not close securely, cease using the product and keep it away from children.
  3. If you think batteries have been swallowed or are in any part of the body, seek medical attention immediately.

WARNING

warning

Risk of explosion due to incorrect battery type

Inserting the wrong type of battery can cause an explosion.

  1. Only use the batteries specified in the technical data.

CAUTION

caution

Fire hazard posed by batteries

The batteries used may pose a fire or burn hazard if handled incorrectly.

  1. Do not try to charge, open, heat or burn the batteries.
  2. Do not short-circuit the batteries.

IMPORTANT

Damage resulting from electrostatic discharge (ESD) when enclosure is open

This product contains electronic components that may be damaged by electrostatic discharges.

  1. Use ESD-compliant working materials (e.g. Grounding strap).
  2. Ground yourself before carrying out any work that could bring you into contact with the electronics. For this purpose, touch earthed metallic surfaces (e.g. door frames, water pipes or heating valves).

Damage resulting from liquids

This product contains electronic and/or mechanic components that may be damaged by liquids of any kind.

    Damage resulting from aggressive cleaning agents

    The surface of this product may be damaged as a result of the use of unsuitable cleaning agents.

    1. Only use cleaning agents that are suitable for plastic surfaces.

    Damage as a result of mechanical impact

    This product contains electronic components that may be damaged by mechanical impacts of any kind.

    1. Avoid touching the electronics.
    2. Avoid other mechanical influences on the electronics.

    Damage as a result of overcurrent or overvoltage

    This product contains electronic components that may be damaged by excessive current or voltage.

    1. Do not exceed the maximum permissible voltages and/or currents.

    Damage due to polarity reversal

    This product contains electronic components that may be damaged by reverse polarity of the power source.

    1. Do not reverse the polarity of the voltage source (batteries or mains adapters).

    Communication interference due to metallic surfaces

    This product communicates wirelessly. Metallic surfaces can greatly reduce the range of the product.

    1. Do not mount or place the product on or near metallic surfaces.

    NOTE

    notice

    Intended use

    SimonsVoss-products are designed exclusively for opening and closing doors and similar objects.

    1. Do not use SimonsVoss products for any other purposes.

    Malfunctions due to poor contact or different discharge

    Contact surfaces that are too small/contaminated or different discharged batteries can lead to malfunctions.

    1. Only use batteries that are approved by SimonsVoss.
    2. Do not touch the contacts of the new batteries with your hands.
    3. Use clean and grease-free gloves.
    4. Always replace all batteries at the same time.

    Different times for G2 locks

    The internal time unit of the G2 locks has a technical tolerance of up to ± 15 minutes per year.

    1. Regularly reprogram time-critical locking devices.

    Qualifications required

    Installation and initial operation require specialist knowledge.

    1. Only trained specialist personnel may install and put the product into operation.

    Incorrect installation

    SimonsVoss Technologies GmbH accepts no liability for damage caused to doors or components due to incorrect fitting or installation.

    Modifications or further technical developments cannot be excluded and may be implemented without notice.

    The German language version is the original instruction manual. Other languages (drafting in the contract language) are translations of the original instructions.

    Read and follow all installation, installation, and commissioning instructions. Pass these instructions and any maintenance instructions to the user.