Variante A0 (Standing/PAS24) - Digital SmartHandle AX

The following tools are required for disassembly:

  • TX-15 screwdriver
  • Slotted-head screwdriver
  • PH-2 screwdriver
  • 1.5 mm hex key

Remove escutcheons

  1. Disassemble electronic cylinders if necessary.
  2. Unscrew the headless screws of both handles.
  3. If necessary, remove the escutcheon covers with a slotted screwdriver.
  4. If necessary, remove the escutcheon covers.
  5. If necessary, unscrew the escutcheon bases.
  6. Remove the inlay of the inside handle with a slotted screwdriver.
  7. Unscrew the screws of the base of the inside handle.
  8. Remove the inside handle.
  9. Pull out the assembly with the square.
  10. SmartHandle AX is removed from the door.
  11. Push the locking pin of the square inward and pull the square out of the assembly.
  12. The square is removed.

Remove handle from assembly

  1. Insert the hex key into the hole provided in the square socket.
  3. Push the hex key towards the closest edge and hold it down.
  4. Pull the handle off the assembly.
  1. SmartHandle AX is now removed.