Fastening - Digital SmartHandle AX

Rosette fastening with (optional) mechanical override

• Variant A0 (Standing installation)
• Variant A1 and A2 (Downward installation)
• Variant DS (Reader on both sides)
• Variants E0 and E1 (Scandinavian Oval)
• Variant A1.PAS24 (Downward installation with PAS24)

You fasten the SmartHandle AX through the drill holes and holes provided in the mortise lock.

Mounting on a tubular frame with (optional) mechanical override

Variant A3 (Tubular frame)

You fasten the SmartHandle AX to adapter plates. These adapter plates are screwed onto the tubular frame using rivet nuts.

Rosette fastening with panic bar adaptation

• Variant A4.P11 (CISA panic bar)
• Variant A4.P1/A4.P2 (BKS panic bar)

You fasten the using adapter SmartHandle AX plates through drill holes and the holes provided in the mortise lock. A panic bar, which must be ordered separately, can then be fitted on the inner side.

Backplate mounting

Variant F1 (French 195 mm backplate)

You attach the SmartHandle AX through the drill holes of adapter plates.