For door thickness X: prepare spindle - Digital SmartHandle AX

  1. Saw at hand.
  2. Vernier calliper at hand.
  3. PH2 screwdriver at hand.
  1. For X: measure the door thickness.
  3. For X: mark the sawing point on the spindle.

  4. NOTE

    notice

    9 mm spindle with 8 mm end

    The 9 mm spindle has an 8 mm end. This end is inserted into the electronic fitting.

    1. Trim the 9 mm spindle, ensuring that the 8 mm end is not the cut part.
  6. For X: trim the spindle with a suitable saw.