Handle - SmartHandle AX Advanced

Item code

Description

S3.LEVER.OR.X.Y

Handle inside and outside with oval rosette for retrofitting of:

  • K1 (metal frame doors)
  • N3 (Conventional mounting 105-145)

S3.LEVER.RR.X.Y

Handle inside and outside with round rosette for retrofitting for:

  • L1 (Mounting of rosettes)

S3.LEVER.IS.X.Y

Inner side and outer side handle for retrofitting of:

  • N1 (Long backplate/short backplate)
  • N2 (Conventional mounting SH3062 or French backplate)
  • M1 (Security fitting ES3)

S3.LERVER.SO.X.Y

Handle inside and outside for Scandinavian Oval for retrofitting with fastening for:

  • P1 (Scandinavian Oval)

Use X for the lever handle variant and Y for the spindle.

Handle variants

Letter

Description

A

L-shaped R (round, curved)

В

L-shaped G (mitred)

C

U-shaped R (round curved)

D

U-shaped G (mitred)

E

U-shaped, rounded, offset

F

U-shape (rectangular and offset)

L

U-shape (rounded and angled at 45°)

0

Delivery without handle (for use with adapter sets and third-party handles, see Third-party handle adapter (FSB))

Spindle

This is SmartHandle AX Advanced available for various spindle sockets in the mortise lock (see also Spindle socket in mortise lock):

You SmartHandle AX Advanced have one of three spindles:

  • 7 mm
  • 8 mm
  • 9 mm

The other spindle sockets in the mortise lock are covered with adapter sleeves.

To order the correct handle set, all you need to know is the width of the spindle. You can easily measure these.

  1. Remove the inside handle.
  2. For 7 mm spindle only: pull the adapter off the spindle.
  3. For 7 mm square only: keep the adapter.
    You will need this for the replacement handle.
  4. Measure the width of the spindle.

Then order the handle set that matches your spindle.

Item code

Description

7-8

The socket for the spindle of the handle has a width of 8 mm. Suitable for all spindle widths except 9 mm.

9

The handle’s spindle recess is 9 mm. Only suitable for 9 mm spindle width.