Retrofitting cover retaining bracket for open groove bushing (variant K1) - SmartHandle AX Advanced

  1. Remove the old cover.
  3. Remove the screw that secures the grooved bushing.
  5. Pull out the grooved bushing.
  7. Convert the cover retaining bracket to the open groove bushing (see Change cover retaining bracket to open grooved bushing)

  8. NOTE

    notice

    Plastic clip only for smooth electronic housings without bars

    The plastic clip is used to position the metal plate. From approx. 01/2025, the electronics housings were fitted with two bars that fulfil the same function.

    1. If your electronics housing has two bars next to the groove socket, remove the plastic clip.
  10. Insert the cover retaining bracket into the slot of the old grooved bushing.
  12. Screw the cover retaining bracket tight.
  14. Fit the new cover.