Fitting the LockNode (Scandinavian Oval) - SmartHandle AX Advanced

  1. Special tool at hand.
  1. Insert the special tool into the cover inlay on the electronics side.
  3. Use the special tool to carefully bend the cover inlay upwards.
  5. Slide the cover upwards.
  7. Cover unlocked.
  8. Remove the cover.
  10. Use the special tool to unhook the reader module clip.
  12. Remove the reader module.
  15. Push the LockNode into its designated slot.
  17. Place the reader module back into the module support.
  20. SmartHandle AX Advanced will beep three times.
  21. Use the special tool to reattach the reader module clip.
  23. Position the cover on the fastening plate at the bottom.
  25. Fold the cover upwards.
  27. Push the cover against the door while sliding it downwards at the same time.
  29. Cover snaps into place.
  30. Press the inlay into place.
  1. LockNode is mounted.