Prepare door (drilling template) - SmartHandle AX Advanced

  1. Pin or scriber at hand.
  2. Drill at hand.
  3. Suitable drill bit at hand (Ø 7 mm).
  4. PH2 screwdriver at hand.
  1. Insert the spindle into the mortise lock.
  3. Place the drilling template on the spindle.
  5. Align the drill template vertically using the printed scale.
  6. Mark the drill holes with mark 1.
  8. Remove the drilling template and rotate it 180 degrees.
  11. Place the drilling template on the spindle.
  13. Align the drill template vertically using the printed scale.
  14. Mark the drill hole with mark 2.
  16. Remove the drilling template and spindle.
  19. Remove the mortise lock.
  21. Drill the required holes.
  23. Fit the mortise lock.