Remove fitting (P1 DS - Scandinavian Oval, reader on both sides) - SmartHandle AX Advanced

  1. 1.5 mm hexagonal wrench available.
  2. 4 mm Allen key available.
  1. For MO: remove the screws holding the cylinder (SW4).
  3. For MO: pull out the inner cylinder.
  5. For MO: pull out the cam cylinder.
  7. Remove the fitting in the reverse order to installation.
  8. Loosen the cover by bending the inlay outwards using the special tool.
  9. Insert a 1.5 mm hex key into the hole in the spindle mount in the module support.
  11. Bend the hex key to the side where the hole is located while pulling on the outside handle.
  1. SmartHandle AX Advanced is now removed.