Technical data - RouterNode 3

Power supply (external)

• 6 V_DC - 24 V_DC (max. 2 W)
• Typical power consumption 47 mA @ 12 V_DC
• Screw terminals for stripped wires (cross-section: 0.14 mm² - 1.5 mm²); see labelling on the printed circuit board for polarity; max. cable length 3 m

Example of a power supply unit: SimonsVoss WN.POWER.SUPPLY.LNC

Power supply (Power over Ethernet)

• IEEE 802.3af PoE, fully isolated
• Vin: 36 V_DC - 57 V_DC
• Typical power consumption 1.2 W, max. 2 W

It is not permitted to supply power to the device via both PoE and power supply unit at the same time.

Power supply (USB-C)

USB standard voltage (only for initial operation and maintenance; not permitted for continuous operation. Auxiliary voltage output not available)

Ambient temperature

• Operational: -5 °C to +45 °C
• Storage: -25 °C to +60 °C

Humidity

Max. 90%, non-condensing

Protection rating

IP20

TCP/IP

• 10T/100BASE-T Full duplex, Auto-MDIX, DHCP client, IPv4
• 1 TCP server on Port 2101
• DHCP, Auto-IP or static IP
• Webserver (HTTPS/HTTP)
• Connection: RJ45
• Security
• TLS V1.3
• Client/server certificates
• Other supported protocols
• mDNS
• SNMP
• SNTP
• Syslog

Wireless

WaveNet

• Prerequisites: LockNode firmware ≥ 33.10, no G1 locking devices
• Not compatible with RingCast

Protection rating

IP20

Status LED

RGB LED

Network LED

Yellow/green LED (only when lid is open)

Digital inputs

• Quantity: 4
• Voltage: max. 13.5 V_DC (low: <1.4 V_DC, high: >2.3 V_DC, recommended for high: 5/12 V_DC)

Digital outputs

• Number: 2 open drains
• Load capacity: max. 14 V_DC, max. 200 mA

Relay output

• Number: 1 changeover contact
• Load capacity: max. 50 V_DC/30 V_AC RMS, max. 1 A

Auxiliary voltages

4 V_DC - 4.6 V_DC, max. 80 mA (not available when powered via USB-C)

Cables for I/O applications

• Length: max. 30 m (except RS-485)
• Spring-loaded terminals with cross-section 0.2 mm² to 0.5 mm²

RS-485

• Length: max. 1200 m; recommended <800 m
• Cable type: Belden 3107A/Belden 9841/J-Y(ST)Y 2×2×0.6 mm2/Ethernet CAT6 cable
• Spring-loaded terminals with cross-section 0.2 mm² to 1.5 mm²
• Termination: 120 Ω, can optionally be activated with jumper J5

Sabotage detection

Load capacity: max. 9 V_DC, max. 20 mA

Interface

Via TCP/IP