Product-specific safety instructions - RouterNode 3

CAUTION

caution

Risk of burns due to hot circuit board

If you power the device with Power-over-Ethernet (PoE), the board can become very hot.

  1. Allow the unit to cool down before opening the housing.

CAUTION

caution

Risk of electric shock from connected power supply

The device is supplied with power during operation. Opening the housing and touching live parts may result in electric shock.

  1. If the power supply is connected, do not open the housing.
  2. Disconnect the power supply (or disconnect the network cable) before opening the housing.

IMPORTANT

Faults caused by multiple simultaneous power supplies

The RouterNode 3 features several connections for different power supply sources. If these are connected at the same time, they may cause undesired current flows and faults.

  1. Always disconnect the power supply being used before connecting another power supply source.
  2. Only connect one power supply source at a time.

NOTE

notice

Unauthorised access with standard access data

The standard access data can be viewed freely. Unauthorised persons cannot change the access authorisations, but they can change the network configuration. You will then no longer be able to reach the device via the network and will have to reset it.

Some browsers do not transmit spaces at the beginning of the password.

  1. Change the default password.
  2. Do not start or end the password with spaces.

Further documentation

Further documentation on SimonsVoss products can be found on the SimonsVoss website (https://www.simons-voss.com/de/downloads/dokumente.html).