Reset control device AX - LSM 3.6 SP1 Basic

  1. LSM open.
  2. Control Device AX connected to the power supply.
  3. SmartStick AX connected.
  1. Wake up the Control Device AX by activating one of the function inputs (for example, by connecting it to the reference potential).

  3. NOTE

    notice

    Activation via the function input executes a programmed action, where applicable

    If you assign an action to a function input and wake up the Control Device AX via that function input, then that action will be executed when the Control Device AX is activated.

  4. Click the button to read data from a BLE device.
  5. The read-out process is started.
  7. Reading Control Device AX is completed.
  8. The Control Device AX window will open.
  10. Click the Reset button.
  11. The Reset Control Device AX window will open and ask for the password.
  13. Enter the password or apply the password from the database (applying the password from the database is only possible if it is stored Control Device AX in the same database).
  14. Reset starts.
  1. Control Device AX reset is completed.

In window Management of Control Devices AX, the reset Control Device AX is displayed again with the initial settings:

After resetting, you can remove the Control Device AX, see Remove control device AX.