Mechanical defect - Step-by-Step SVCN

Preparation

  1. Integrator system open.
  1. Select the defective locking device.
  2. Create a task to reset the defective locking device.
  3. Click the button Add task, to add the task to the task list.
  4. Create a task to programme the replacement locking device.
  5. Click the button Add task, to add the task to the task list.
  6. Save the XML file.

Reset

  1. SmartIntego Tool (SVCN) opened.
  2. Replacement locking device exists.
  3. Programming device (SI SmartStick AX / SI.SmartCD) is connected.
  1. Manually import the locking device configuration using File and Import the entry VCN Configuration. If you have activated automatic import/export, import the XML file manually the first time you use it.
  2. Select the imported task to reset the defective locking device.
  3. Prepare a programming device (SI SmartStick AX: Touch the card reader of the AX lock, SI.SmartCD: Place its radio symbol on the card reader).
  6. Click on the button Execute task.
  7. Select the imported task for programming the replacement locking device.
  8. Prepare a programming device (SI SmartStick AX: Touch the card reader of the AX lock, SI.SmartCD: Place its radio symbol on the card reader).
  11. Click on the button Execute task.
  12. Hold a blacklist card (contains all currently valid blacklist entries, comes from the integrator system) in front of the locking device (for locking devices that read on both sides: To both readers).
  13. Blacklist in locking device updated.
  14. If you have not activated automatic import/export (see ), select via and the entry .Automatically save and load XML file for transmission between SmartIntego tool (SVCN) and integrator systemFileExportVCN Configuration
  15. Import the XML file into the integrator system.
  1. The locking device is displayed with new data.