Install SmartIntego Tool (SVCN) - Step-by-Step SVCN

With the SmartIntego tool (SVCN) you configure Smartintego systems that are based on a virtual network.

To do this you must install the SmartIntego tool (SVCN) on a physical PC.

  1. Operating system Windows 10 or later.
  2. Administrator rights available.
  1. Execute the file SmartIntego_setup_X_X_vcn.exe.
  2. Follow the instructions.
  3. SmartIntego tool (SVCN) installed.
  4. SmartIntego-Config-Tool installed (optional).
  5. Driver for SI.SmartCD installed.
  6. Baltech driver for SmartCD.HF installed.
  7. After installation, connect a programming device (SI SmartStick AX / SI.SmartCD).

NOTE

notice

Descriptions in this document

The descriptions in this document refer to version 3.0 (or later) of the SmartIntego tool (SVCN).

  1. Use the latest version of the SmartIntego tool (SVCN).

NOTE

notice

Description of door management with SmartIntego Config Tool

The door management descriptions in this document refer to the SmartIntego Config Tool. Generally, your integrator has its own door management software, the operation of which may differ.

  1. Read the documentation for the integrator system used.
  2. Only use this chapter if your integrator absolutely needs the SmartIntego Config tool.