Lock-GatewayKey Configuration - Step-by-Step SVCN
If a lock gateway key configuration is found during the update check, the data is automatically converted to AX format.
The update changes the card configuration of the locking devices:
Properties | Value after update |
|---|---|
Maximum readable file size (per file) | 8192 bytes |
File type for ID and access file | Standard |
Keys used so far | Unified to LockGateway key (only if all keys match). |
Previously used key numbers | Unified to LockGateway key number (only if all key numbers match). |
All other values | Will be adopted unchanged. |
The changes are transferred to the locking devices during programming. You do not have to programme the locking devices immediately. Test the changes on some selected locking devices anyway.
You only need to reprogram the locking devices after the update if you change the cards or card configurations yourself. In this case, you must transfer the new card configuration to the locking devices.
NOTE
Programming requirement not displayed
The locking devices in your project are not managed in the SmartIntego tool (SVCN). Therefore, the SmartIntego tool (SVCN) does not "know" whether programming is required after changes to the card configuration.