Functional test - Digital Cylinder AX (Z5)

Perform a function test after each installation and each battery change.

  1. Assembly or battery change completed
  2. Digital Cylinder AX programmed
  3. At least one identification medium authorised
  1. Pull hard on the electronic or mechanical thumb-turns.
  2. Turn the electronic thumb-turns. The Digital Cylinder AX must not be tight, nor rotate the tappet.
  3. Activate an authorised identification medium.
  4. Check that the Digital Cylinder AX engages and pushes out the locking bit.
  1. Mounting or battery change successfully completed.