Product-specific safety instructions - Digital Cylinder AX (Z5)

WARNING

warning

Blocking of escape routes due to faulty function

If mortise locks with panic function are to be used together with a locking cylinder, improper use of locking cylinders may result in the panic function not functioning properly.

  1. Make sure that all parts of the closure are in working condition (EN 179).
  2. Only install the cylinder in mortise locks for which it has been expressly approved (refer to the documentation of the lock manufacturer).

Locking in people as a result of closures or sealing strips on the door unit

If locks or sealing strips are attached to the door unit, the locking cylinder may not function properly.

  1. Make sure that any locks or sealing strips do not interfere with the operation of the locking cylinder.

IMPORTANT

Assembly error due to incorrect length

The Digital Cylinder AX is available in various lengths. If you order the wrong length, the Digital Cylinder AX cannot be installed correctly.

  1. Order your Digital Cylinder AX in the correct length or adjust the length yourself.

Mechanical damage to the thumb turn as a result of obstacles

If the thumb turn can knock against the wall or other objects as a result of the installation situation, it may become damaged.

  1. In such situations, use a suitable door stop.

Damage caused by moisture in outdoor use

Moisture can damage the electronics.

  1. If you want to use the locking cylinder for outdoor applications or in high humidity (bathrooms or washrooms), use the WP version.
  2. Carefully insert the locking cylinder to avoid damaging the O-rings.

Damaging Digital Cylinder AX due to the use of unsuitable tools

Special tools are required to open the caps and remove the Digital Cylinder AX. If you use unsuitable tools, you may damage the Digital Cylinder AX.

  1. Please use only the special tool, which is available separately (see Accessories).

NOTE

notice

Locking up of persons without means of identification

The freely-rotating construction of the closing cylinder can only be opened with a means of identification from both sides.

  1. Ensure that no persons without means of identification are in the secured area.

Door obstructed by locking cylinder

Make sure that the opening and closing of the door is not obstructed by the locking cylinder or parts thereof.

Conditions for authorisation security

Operation with Mifare Classic and/or PinCode keypad excludes authorisation security class D according to DIN EN 15684:2021.

VdS requirements

VdS approval for Class BZ is subject to the following conditions:

  1. Protect your VdS-/SKG Digital Cylinder AX with burglar-resistant door plates certified to VdS/SKG class B oder C (DIN 18257 class ES 2 resp. ES 3).
  2. Make sure that the Digital Cylinder AX does not protrude by more than 3 mm.
  3. Please use your Digital Cylinder AX only with MIFARE® DESFire® identity media.

Fire resistance

The fire resistance of the Digital Cylinder AX tested according to DIN EN 1634-2: 2009:05 for fire and smoke resistant doors (type: wood and wood-product fire protection doors with a resistance time of 90 minutes). The test report has the PfB number 18/11-A495-B1 (test institute for construction elements).