Controller - SmartRelay AX Classic

  1. Fastening material available (four suitable screws Ø 4 mm, e.g. flat or round head screws and, if necessary, suitable dowels).
  2. SmartRelay AX Classic disconnected from power supply.
  1. If necessary, prepare the fastening (drilling and dowelling).
  3. Unscrew the SREL AX Classic controller cover screws (PH2).
  5. Insert the supplied backup battery (positive terminal pointing away from the circuit board).
  7. Screw the base plate in place.
  9. Connect the cables to the screw terminals.
  11. Screw the cover back on.
  1. Installation completed.