LockNode - SmartRelay AX Classic

  1. SmartRelay AX Classic disconnected from power supply.
  1. Remove the reader cover forSmartRelay AX Classic.
  2. Pull the card reader out of the reader.
  4. Screw the LNI to the bottom of the card reader using the supplied bracket.
  6. Insert the card reader with the installed LockNode back into the reader.

  8. IMPORTANT

    Malfunction due to reverse polarity of card reader

    The card reader can also be mounted physically twisted, but then does not function electrically.

    1. Insert the card reader so that the LockNode is facing the coil.
  9. Place the cover on the base plate again.
  10. Reconnect the SmartRelay to the power supply.