Installing the activation slave - VdS shunt lock

Mount the activation slave above the door frame. Keep a distance of at least one and a half metres from other SimonsVoss components (see drawing) to prevent mutual interference.

Align the activation unit so that the fastening screws are in a horizontal line (see drawing) in order to rule out interference during normal door operation.

No separate antenna is used for this installation (seeConnection of the external antenna at the slave (optional)). Therefore, plug jumper B2 to maximise the range (see also Setting the jumpers at the slave).

With this simple installation method, activation is possible both from inside and outside. According to VdS, activation must only be possible from the outside (see VdS requirements). Therefore this installation without separate antenna is not VdS-compliant.