UID mode (Unique Identifier) - System description WO

In this mode, the card is only identified by the unique identifier or card serial number read out.

Neither the unique identifier nor the card serial number are protected in any way. Attackers can identify the card with its unique identifier and card serial number.

Frequency

13.56 MHz (RFID)

Supported Reading Technologies

  • ISO 14443-A
  • ISO 14443-B

Unique Identifier/Card Serial Number

Static

Supported card types

  • MIFARE Classic
  • MIFARE DESFire
  • Legic-advant (ISO 14443)
  • HID iCLASS SEOS UID (ISO 14443)

In the area, SI-Tool: Kartenkonfiguration - Custom portion [offen] you specify which contiguous bytes of the identification number should be read out from the locking device. Normally, the entire identification number is evaluated; restrictions are specified by the card manufacturer or the integrator.

SI-Tool: Kartenkonfiguration - Offset Online Connection (Bytes) [offen]

SI-Tool: Kartenkonfiguration - Length Online Connection (Bytes) [offen]

SI-Tool: Kartenkonfiguration - Offset Whitelist (Bytes) [offen]

SI-Tool: Kartenkonfiguration - Length Whitelist (Bytes) [offen]

  • Specifies from which byte the identification number is read.
  • Use for online access
  • Specifies how many bytes of the identification number are read.
  • Use for online access
  • Specifies from which byte the identification number is read.
  • Use for whitelist access
  • Specifies how many bytes of the identification number are read.
  • Use for whitelist access

The exact parameters can be found in the documentation of your integrator system.

Identification with a random ID (RID) is not possible.