SmartIntego Tool (WO) - System description WO

The SmartIntego tool (WO) is used to manage SmartIntego system configuration and locking devices.

Configurable:

  • Passwords
  • Card configurations
  • Construction site whitelist
  • Locking devices (equipment features and configuration beep)
  • WaveNet configuration (with the included SmartIntego Manager)

This data is stored in a separate project file (*.ikp) for each locking system. This file is therefore important and must be handled according to the following rules.

  1. Only work with a single copy of the project file.
  2. The configuration status in the software and locking devices must match what is actually programmed.
  3. Older project files with a different status are an administrative and security risk!
  4. Save the file in a secure and managed IT environment.
  5. Backup the project file.

For further information, please refer to the LSM-Mobile manual.

To avoid mixing different projects and systems, a separate project file with a separate password must be created for each customer project.

NOTE

notice

Multiple project files for an integration project

Using a separate project file for each hardware controller of the integrator system significantly increases the administrative effort for the installer.

  1. SimonsVoss advises against this type of administration.
  2. If necessary, ensure that the integrator system supports the use of multiple project files.

Loss of the project file (*.ikp)

If the project file is lost despite a backed up environment and backup, you will no longer be able to continue working with the existing project.

  1. Reset the locking devices with the locking system password.
  2. If necessary, reset the LockNodes with a hardware reset.
  3. If necessary, reset the GatewayNodes with a hardware reset.
  4. Then reprogram the entire locking system.