Long-term opening/Flip-flop or static office mode - System description WO

Depending on the integrator, this function is different:

• Long-term opening
• Flip-flop mode
• Static Office Mode

But it always means the same thing. Locking devices thus engage for a long period of time (one minute or longer). During this time, users can operate the door mortise lock with the locking cylinder or SmartHandle.

As an alternative to an authorised card, the locking device can also be engaged differently:

• Remotely with the integrator system
• Time-controlled

The engagement duration can be adjusted (one minute to infinite, i.e. permanently engaged). Combinations enable a wide range of requirements to be covered.

Example:

A locking device can be engaged using an authorised card:

• During office hours between 7:00 and 17:00, the door is heavily frequented:
• For convenience reasons, the locking device remains engaged for the long term and does not have to be engaged every time.
• Outside office hours between 17:00 and 7:00, there are a maximum of individual persons in the building.
• For security reasons, the locking device remains engaged only for a short time.

This behaviour is often referred to as office mode. The locking device can be disengaged:

• Manual: With an authorised card
• Automatic: Through time control