Programming Device (SI.SmartCD) - System description WO

The SI.SmartCD is a local USB programming device and is used by the SmartIntego tool:

  • Programming of locking devices
    • Via WaveNet (SI.SmartCD remains connected to the configuration PC)
    • Direct
  • Emergency opening
  • Read-out of offline accesses (also possible via WaveNet)
  • Read-out of locking devices (also possible via WaveNet)

The SI.SmartCD requires a direct physical connection to the locking device with which communication is to take place. Due to the short range (near field), the distance between the SI.SmartCD and the card reader of the locking device may only be a few millimetres.

During programming via WaveNet, the SI.SmartCD only needs to be connected to a free USB port until the first locking device has been programmed. The configuration is then fully saved in the SmartIntego tool and the SI.SmartCD can be removed. However, as soon as the card configuration has been changed, the SI.SmartCD must be connected once. It can then be removed again after programming the first locking device.