QR code scanner (chip ID) - System description WO

The QR code scanner is an auxiliary tool for setting up the locking system. SimonsVoss components supplied must be assigned to the correct doors before configuration to ensure that their size and properties match.

Normally, the name of the door on which the locking device is to be used is written to the packaging of the locking device on the basis of a name list. There is also a data matrix code on the packaging containing the chip ID. This code can be scanned with a data matrix code-capable reader (USB). This step links the doors and GatewayNodes with the chip IDs (and thus also with the LockNodes and locking devices).

The exact procedure is also described in the step-by-step manual.

  1. Open the name list (names of the doors and GatewayNodes) with the SimonsVoss QR code scanner.
  2. Label the packaging of the locking devices and GatewayNodes with the names from the name list.
  3. Scan the respective data matrix codes on the packaging.
  4. QR code scanner extracts chip IDs and stores them in the name list.
  5. Proceed in the same way with the remaining SmartIntego components.
  6. Save the name list with the read chip IDs.
  1. Name list will be used later in SmartIntego Manager.