Battery replacement (locking devices and SmartHandles) - System description WO

If the integrator system displays a battery warning, the batteries must be replaced:

  1. Battery replacement card created (see step-by-step instructions).
  1. Replace all batteries in the affected locking device as described in the short instructions supplied.
  2. Locking device signals successful battery replacement (flashes several times).
  3. Hold a battery replacement card in front of the locking device for the components (not required for AX).
  4. The locking device immediately measures the battery status.
  5. Battery status is transmitted to the integrator system the next time a card is activated.
  6. The integrator system no longer displays a battery warning for this locking device.
  7. Test LockNode.

    Detailed information can be found in the documentation for the respective component.

    Recommended manufacturers

    SimonsVoss only uses batteries from brand manufacturers:

    • Murata
    • Varta
    • Panasonic
    • Tadirane

    Battery types

    Locking devices

    CR2450

    PIN code keypad

    CR2032

    IO-Node

    2/3AA (Tadiran)