Activating users with identification media - PIN code terminal
Users can activate themselves using their identification medium and User PIN on their own.
The user selects their User PIN themselves. The User PIN must meet the following requirements:
- Length as specified in LSM (see Determining the PIN length)
- No trivial PIN (see Trivial PIN)
The example shows the activation for a User PIN with eight digits. If the length of the User PIN is not eight digits, then the length of the numerical code is different.
- User created and authorised (see Creating users).
- PIN code terminal programmed (see Programming the PIN code terminal).
- Locking device programmed (see Programme locking device).
- Master PIN changed (see Changing the master PIN).
- Activate the identification medium on the locking device.
- The locking device does not engage, but beeps and flashes for a short time. This is normal in this case.
- Press
0for more than two seconds to activate programming mode. - PIN code terminal beeps and flashes orange once.
- Enter
02. - Enter the User PIN.
- Re-enter the User PIN.
- PIN code terminal beeps and flashes green twice.
- PIN code terminal performs an opening on the locking device.
- If the user has not yet been activated: Data record is saved (beeps and flashes green-orange).
- If the user has already been activated: Terminal rejects (beeps and flashes green-orange followed by long red).